You may be wondering how to repair copper plumbing and if a DIY kit is necessary. Well, the first step is to make sure that you have the right tools. The first thing you will need is a pipe cutter. This tool will allow you to cut out the section of the leak, as well as deburr the inside of the pipe. After cutting out the damaged section, you need to fit a repair coupling. This piece of copper putty will not have a stopper, so it will allow you to fit the new pipe without a stopper.
If the leak is from the exterior, you will need a copper pipe paste. Mix baking soda and white vinegar together to make a thick paste. Apply the paste to the exposed pipe and wait 10 minutes. This mixture will remove the majority of the corrosion. However, this solution is temporary. Eventually, the paste will reappear and weaken the pipe. Regardless, if you don’t have a DIY kit, you should hire a plumber or a professional.
Another way to repair the leak is to use an adhesive pipe tape. To use this tape, you need to soak it in water, then apply it to the pipe. You should then smooth it out and wait for it to dry. This method will remove most of the corrosion, but it won’t fix the problem permanently. It will probably come back sooner or later and will eventually weaken the pipe. If you don’t have access to a plumber, it is better to purchase a ePIPE kit instead. This coating is an epoxy-based solution that can protect copper pipes for fifty to seventy years.