If you want to purchase a new water heater, you should consider a few factors before making your final purchase. These factors include size, cost, energy efficiency, and components. This article will help you make the best decision for your home. By the time you’ve finished reading, you should be able to select a new water heater that’s perfect for your needs. Here are some tips to make the decision process easier. If you have any questions, please don’t hesitate to contact us. We’ll be happy to answer your questions.
Energy efficiency
The DOE is working to measure energy consumption of consumer water heaters to determine their energy efficiency. The energy savings achieved by newer water heaters are not directly comparable to previous models. However, the DOE does plan to examine the rebound effect when calculating energy savings. This phenomenon occurs when a more energy-efficient product is used more frequently than its predecessor. In order to minimize this effect, DOE plans to apply a 10 percent rebound factor.
Size
The size of water heater you need depends on the number of people in your household and the level of hot water usage. The peak usage of your household is the most frequently used hot water at one time. The chart below shows the optimum size of water heaters for different households. If you live alone and do not entertain often, a smaller water heater is sufficient. On the other hand, if you have a large family, you’ll need a water heater that can supply water to more than five people.
Components
A good water heater should have a number of components that work together to heat and circulate water. The first one is the heating element. It is made of metal. Metal water heaters have a long life, and they are also cheaper than electric ones. Another important component is the control valve, which controls the flow rate of water through the valve. Some models also include a thermostat. Choosing the right type of water heater depends on your specific needs, but there are several options available.
Cost
The average cost of repairing a water heater is $529, but the average homeowner can expect to spend anywhere from $200 to $851. The price of a repair can vary significantly by the model, and some homeowners can expect to spend as little as $100 to as much as $1300. Gas and electric water heaters use different types of power and both have about the same lifespan. Repairs for these appliances are usually the same, but different problems can occur with gas water heaters and electric models. Common gas water heater repairs involve the pilot light, thermocouple, and gas-control valve.
Installation
When installing a new water heater, make sure you follow all manufacturer instructions. You should make all necessary electrical connections. Plug in a ground wire and connect it to the circuit breaker located near the water heater. You may also want to use a separate electrical disconnect switch near the water heater. Make sure that the water heater is grounded. Also, check the temperature setting by removing the thermostat access plate and making any necessary adjustments. If necessary, set the thermostat to 120 degrees. If you have hard water, a plastic line may be necessary.
If you want help with a new water heater repair or water heater replacement in Phoenix, AZ contact Ben Franklin Plumbing AZ
