There are many different types of Drain Cleaning tools available, but what is the best choice for your home? Air-burst drain cleaners are one option. Chemical drain cleaners are another. Among these tools, you can also use a Drain snake. If you do not know what each one is for, keep reading for some tips. Whether you want to use a drain cleaner on your own or call a Plumbing professional, here are some tips for preventing clogs in your home drainage system.
Drain Cleaning Tips & Tools
One of the many types of drain cleaning equipment, air-burst cleaners utilize pressurized gas to disintegrate clogs. Like the Hydro jet, air-burst cleaners use gas cartridges or built-in compressors to blast through clogs. These cleaners are a quick and effective way to clear clogs. A bonus is that they don’t leave any marks on your pipes.
Air-burst cleaners are not for every situation. They can be hazardous to use, as they contain a highly compressed gas. Wearing protective goggles, gloves, and eye protection are all good practices when using air-burst cleaners to clear a clogged drain. However, if you are not confident, don’t attempt to use these cleaners unless you are a professional plumber.
Chemical drain cleaners
Chemical drain cleaners are the most convenient and common way to clean your clogged drain. These products are concentrated with potent chemicals that clear stubborn blockages. Unfortunately, these cleaners do not work as well as their professional counterparts. They have a foul odor and cause dirty water. Fortunately, there are many alternatives to chemical drain cleaners. Listed below are some of the best ones.
Chemical drain cleaners are harmful to your septic system. They release harsh chemical fumes that can be harmful to human health and the environment. This is especially true if you are not in a well-ventilated area. The fumes can damage your respiratory system. To make matters worse, they can also cause serious damage to your pipes. Unless you’re a plumbing professional, it’s best to hire someone who is familiar with septic systems and can properly repair your drain problem.
You may have heard that a plunger can help unclog a clogged toilet or drain. A plunger works by creating a vacuum seal over the drain opening or toilet clog. As the handle is pushed down, the air moves up and down, forcing the obstruction out of the pipe. This method works great for toilet and sink clogs. Plumber Ben Franklin Plumbing AZ says a plunger can be used to fix other types of clogs as well.
First, you need to insert the plunger into the drain. Make sure that the bottom of the plunger is completely sealed. Then, you must push the plunger until the cup is completely compressed. Then, repeat the process until the water has drain from the sink or bathtub. Wait about 20 seconds to check if it’s worked. Once it is, add more water if necessary to clear the drain. The plunger is an effective drain cleaning tool for many home and business owners.
To use a drain snake, you need to uncoil the metal cable and insert it into the drainage pipe. You should have adequate pressure when using the tool. The cable rotates up and down until it encounters an obstruction. Once it reaches the obstruction, it stops and you need to readjust the cable’s length to avoid damaging the pipe. When using drain cleaning chemicals, you must flush them with water before snaking the pipes to remove any traces of chemicals. If you have used drain cleaners, you should use caution in removing the snake because it may leave a splashback.
While using drain cleaning equipment, remember to wash your tools thoroughly after each use to avoid harboring bacteria and hair. Never resuscitate the snake or put it back in its drum after using it. Wet cable can rust and may need replacing. To maintain the longevity of your cable, you can apply Snakeoil. Snakeoil cuts through moisture and inhibits rust, while also covering any smells in the drains. To prevent corrosion, you can apply snakeoil to new cables. Apply this oil to the cable every week when you retrieve it.